Naming and saving a project
1 Press the [GLOBAL] button.
The button lights up and you enter the GLOBAL menu.
2 Turn the rotary selector to select [Save As] and press it.
• Select [Save] to overwrite a project.
3 Press the []/[] button to move the cursor and turn the rotary
selector to change the character.
Name the project by repeating this step.
• Alphanumeric characters, symbols, or a blank space can be used.
• To delete a character at the cursor, hold down the [SHIFT] button and press
the [BACK] button.
• To insert a blank space in front of the cursor, hold down the [SHIFT] button
and press the rotary selector.
• When an existing project is loaded, its name is shown on the display.
4 Press the rotary selector.
The project is saved.
Basic Operation
24
En