Table of Contents
Advertisement
Setting DEPTH
1 Turn the [DEPTH] knob to change how strongly the modulation
affects the pattern.
The value before the change and the value after the change are shown on the
display.
(1) Value before the change, (2) Value after the change
• If you do not turn the knob for a period of time, the display returns to the
former state.
• The range of the strength is [−64] to [0] to [63].
• When the [Depth] is set to [0], there will be no modulation added to the
pattern.
Example: When turning the [DEPTH] knob to the left or right for the Saw wave
to change the setting value
(1) [0], (2) [32], (3) [63], (4) [−32], (5) [−64]
Phrase arrangement section
85
En
Time Line
Time Line
Hide quick links:
Advertisement
Table of Contents
