PIONEER DJ Toraiz Squid Operating Instructions Manual page 168

Connecting to external equipment
Settings and operations
• Select the setting of [OUT Sync Mode] and [In Sync Mode] of
[CLOCK] setting in the GLOBAL menu according to the timing clock
rate of the connected device.
• Select the [Polarity] setting of [CLOCK] setting in the GLOBAL
menu to [+] or [−] according to the polarity of the connected device.
• When using the unit as a slave device by connecting the CLOCK
OUT terminal of the connected device to the [CLOCK IN] terminal of
the unit, set [Sync Source] of [Sync Common] setting in the
GLOBAL menu to [CLOCK] and set [IN Sync Mode] of [CLOCK]
setting correctly according to the timing clock rate of the connected
device.
• For other settings, refer to the following.
– "[Sync Common] setting" (page 124)
– "[CLOCK] setting" (page 128)
Note
Depending on the external device to be connected, the BPM displayed
on the unit and the external device may be different.
168
En