PIONEER DJ Toraiz Squid Operating Instructions Manual page 154

Connecting to external equipment
 [MIDI THRU/OUT2] terminal set to [THRU (MIDI IN)]/[THRU
(USB IN)]
Send the MIDI messages received with the [MIDI IN] terminal or the
[USB-B] terminal to an external MIDI device connected to the [MIDI
THRU/OUT2] terminal without changing it when [OUT2 Mode]
(page 134) of the [MIDI OUT] setting in the GLOBAL menu is set to
[THRU (MIDI IN)] or [THRU (USB IN)].
Note
Set the MIDI transmit channel of the transmitting device and the MIDI
receive channel of the receiving device correctly.
 [MIDI OUT1] terminal / [MIDI THRU/OUT2] terminal set to
[OUT+MIDI IN] or [OUT+USB IN]
When you set [OUT1 Mode] of the [MIDI OUT] setting in the GLOBAL
menu to [OUT+MIDI IN] or [OUT+USB IN], the unit merges the MIDI
messages and the MIDI messages received with the [MIDI IN] terminal
or the [USB-B] terminal and outputs it.
Note
Set the MIDI receive channel of the receiving device correctly
according to the application.
[MIDI IN] terminal (3)
Connect the MIDI OUT terminal of an external sequencer, etc. to the
[MIDI IN] input terminal using a MIDI cable.
• You can control the sequence playback operation on the unit from an
external MIDI device by sending MIDI messages such as the Start,
Stop, and Continue messages to the [MIDI IN] terminal.
• For the terminal and settings of the related, refer to the following.
– "[MIDI IN] setting" (page 132)
– "[Sync Common] setting" (page 124)
154
En