Error Messages - Siemens MOBY series User Manual

R 01.04
8

Error Messages

What to do when ...
... The PSION display goes blank during MOBY read/write.
S The batteries of the PSION are empty. Insert device in the charging shell,
or install new batteries.
S The battery pack was installed incorrectly on the basic device. The catch
of the battery pack must be on the left side.
... The display remains blank after the device is turned on.
S The batteries are empty.
S The contrast of the display is not adjusted correctly. To adjust, use the
key in the top row.
... Error messages appear but they are not defined anywhere.
S Remove both batteries from the basic device. Wait 60 seconds, and re-
place them again. The device is now in its status on delivery. If the error
continues to occur, the device may be defective.
... LED for communication is red on the STG U hand-held terminal.
S The battery of the MOBY U antenna is empty. → Charge battery (see
chap. 3.4).
... No communication between the basic device and the antenna (handshake
timeout) with the STG U hand-held terminal.
S The battery of the MOBY U antenna is empty. → Charge battery (see
chap. 3.4).
S Check the RS 232 interface on the basic device for secure plug connec-
tion.
... Operation time of the MOBY U antenna gets shorter and shorter.
S Install a new battery in the MOBY U antenna.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
Error Messages
E-61