Password; Antenna - Siemens MOBY series User Manual

R 01.04
4.5.2

Password

A password can be programmed as an option. The password must be entered
prior to a write-access function. Once entered, a password remains valid until
the STG is turned off (i.e., the password only has to be entered once during
several consecutive write commands). The "MOBY" program can also only be
exited with the password.
Default password
On delivery, the password is "123." This password is also set after you remove
the batteries of the STG.
Forgot the password?
If a password is forgotten, there is no way to obtain it again. The only solution
is to remove the main battery and the button cell from the PSION for a few
minutes. After the batteries have been re-installed and the device has been
turned on, the STG assumes its status on delivery (i.e., the password is "123").
Password 99999999
Changing the password to 99999999 (i.e., eight 9s) has a special purpose.
The write-access function to the MDS and the "file/exit" function can no longer
be executed. The password can also no longer be changed. The only way to
access the write-access function again is to remove all batteries. See also
"forgot the password?".
4.5.3

Antenna

Only for MOBY E: The antenna field on the read head is switched between
"card" (large antenna) and "button" (small antenna). See also chapter 3.2.1.
The antenna must be set once when the read head is commissioned. The
set antenna is retained on the read head when the hand-held terminal is
turned off.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
The "MOBY D/E/F/I/U" Programs
E-31