Siemens MOBY series User Manual page 82

Appendix
The tables below provide a summary of implemented commands.
The MOBY E Library
Function Call
CCT_READ_N_BLOCK
CCT_WRITE_N_BLOCK
CCT_WRITE_SIGNAL
CCT_OFF
CCT_MODE
CCT_OPEN
CCT_CLOSE
CCT_SETKEY
CCT_SET_KEY_TEMP
CCT_GET_FIELD_STATE Scan current card indices
CCT_RESET
Although the commands of the MOBY E library are the same as those of the
standard MOBY E library "CCTWAPI," not all commands of "CCTWAPI" are
available on the hand-held terminal.
E-76
Short Description
Read card data (1 to n data
blocks, max. of 96 bytes)
Write card data (1 to n data
blocks, max. of 96 bytes)
Address digital output, re-
served for switching the
antenna
Turn off antenna field
Set field mode of the
antenna field
Open logical device
Close logical device
Parameterize read-card/
write-card interface
Change temporary key
Reset read head
(5)J31069-D0126-U001-A5.1-7418
R 01.04
Type of Command
Standard
Standard
Standard
Standard
Standard
Only for
SIM operation
via RS 232
Only for
SIM operation
via RS 232
Optional
Optional
Optional
Optional -
general command
STG Hand-Held Terminal