Siemens MOBY series User Manual page 85

R 01.04
The MOBY U Library (normal addressing of MDS)
Function Call
moby_u_init
moby_u_read
moby_u_write
moby_u_reset
moby_u_mds_status
moby_u_slg_status
nMobyUOpen
vMobyUClose
nMobyUReadStartProtocol
moby_u_CheckDSR
moby_u_SetDTR
moby_u_ReadOTP
moby_u_WriteOTP
moby_u_ReadTagId
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
Short Description
Initializes an MDS with a filler from address 0 to
the end address
Reads one data block from the MDS
Writes one data block to the MDS
Transfers reset command with parameterization
to the antenna
Reads the status data from the MDS (e.g., the
battery lifespan)
Sends status command to the antenna
Opens interface. Turns on antenna.
Closes the opened interface. The antenna is tur-
ned off.
Reads the startup telegram from the antenna
Checks the DSR signal on the interface
Sets the DTR signal or resets it
Reads the complete OTP memory
Writes the complete OTP memory
Reads the TagId from the MDS
Appendix
E-79