Developing User Applications - Siemens MOBY series User Manual

R 01.04
A.2

Developing User Applications

What Do I Need?
The C development package from PSION (SIBO C SDK incl. Top Speed Com-
piler) is required for user applications.
For the communication connection, you will also need a 3link interface and the
PC cable with a 9-pin sub D and mini DIN plug connector.
Although, in principle, applications can also be developed with the Basic
programming language OVAL, the MOBY library cannot be used.
The MOBY Library
A library for MOBY D, MOBY E, MOBY F, MOBY I and MOBY U is available.
The library (MOBY D/E/F/I/U) must be ordered under order number
6GT2 381-1AB00. The C library also includes a description of the interface
commands.
The following table summarizes the implemented commands.
The MOBY D Library
Function Call
RF_ReadBlock
RF_WriteBlock
RF_ReadTagId
RF_Status
RF_Init
nMobyDOpen
vMobyDClose
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
Short Description
Reads a block from the MDS
Writes a block
Selects the tag. Reads the TagId
Determines the tag type
Writes all user blocks
Opens an interface
Closes the opened interface
Appendix
E-75