Siemens MOBY series User Manual page 2

Safety Guidelines
This manual contains notices which you should observe to ensure your own per-
sonal safety, as well as to protect the product and connected equipment. These
notices are highlighted in the manual by a warning triangle and are marked as
follows according to the level of danger:
Note
draws your attention to particularly important information on the product,
handling the product, or to a particular part of the documentation.
Qualified Personnel
The device/system may only be set up and operated in conjunction with this
manual.
Only qualified personnel should be allowed to install and work on this equip-
ment. Qualified persons are defined as persons who are authorized to commis-
sion, to ground, and to tag circuits, equipment, and systems in accordance with
established safety practices and standards.
Correct Usage
Note the following:
Warning
!
This device and its components may only be used for the applications de-
scribed in the catalog or the technical description, and only in connection
with devices or components from other manufacturers which have been
approved or recommended by Siemens.
This product can only function correctly and safely if it is transported,
stored, set up, and installed correctly, and operated and maintained as
recommended.
Trademarks
MOBYR is a trademark of SIEMENS AG.
Some of the other designations used in these documents are also registered
trademarks; the owner's rights may be violated if they are used be third parties
for their own purposes.
Copyright E Siemens AG 1999 All rights reserved
The reproduction, transmission or use of this
document or its contents is not permitted without
express written authority. Offenders will be liable for
damages. All rights, including rights created by patent
grant or registration of a utility model or design, are
reserved.
Siemens AG
Automation and Drives Group
Division Special Products,
Projects Automotive Industry, Training
PO Box 4848, D-90327 Nuremberg
Siemens Aktiengesellschaft
Disclaimer of Liability
We have checked the contents of this manual for
agreement with the hardware and software descri-
bed. Since deviations cannot be precluded entirely,
we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any
necessary corrections included in subsequent edi-
tions. Suggestions for improvement are welcomed.
E Siemens AG 1999, 2000, 2002, 2003, 2004
Technical data subject to change.
Order No. (5)J31069-D0126-U001-A5.1-7418