Assembly - Siemens MOBY series User Manual

R 01.04
Ordered Order Number
Components
MOBY U 6GT2 503-0AA00
h hand-held d h ld
terminal STG terminal STG
2.2

Assembly

Perform the following steps in the order shown below.
S Install button cell. Button cell is located in a recess in the packaging of the
PSION Workabout.
S Insert batteries. The battery catch must point to the left.
S Insert the flash program memory with the STG application in the upper
slot (A).
S Install read head, and screw down (MOBY D/E/F/I).
S Join antenna and PSION Workabout (MOBY U).
– Screw the PSION Workabout to the metal frame with 4 screws.
– Plug the submin D plug of the MOBY U antenna into the RS 232 interface
of the PSION Workabout and screw down.
– Slide the PSION Workabout on the guide rail of the upper housing shell of
the antenna until the lock snaps in.
Assembly is complete.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
Commissioning the STG
Pack List
mx
PSION Workabout
MOBY U antenna
Memory card incl.
STG software and
user's manual
NiCd battery
Pack Number
A5E00016735
6GT2 503-1AA00
6GT2 303-1CA00
6GT2 094-0AB00
E-5