Table of Contents
Advertisement
User Manual EtherNet/IP / CAN - Converter
Document code: MN67419_ENG
Revision 1.000 Page 12 of 34
Page 12 of 34
Industrial Electronic Devices
USE OF COMPOSITOR SW67419:
To configure the Converter, use the available software that runs with Windows called SW67419. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67419, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67419
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67419 and is the answer not in the manual?