Delivery Reversing Roller (Lower); Removing The; Removing The Feeder Cover; Removing The Rear Cover - Canon DADF-P1 Service Manual

[2]
[1] [3]
3) Remove the resin ring [1], belt [2], gear [3], and bearing [4].
4) Remove the two screws [1], two springs [2], the member [3], and the
member [4] and then remove the platen roller [5].
[3]
[2]
MEMO:
When the read roller 2 is removed first, it works easily [the installation of the
platen roller].

3.4.10 Delivery Reversing Roller (lower)

3.4.10.1 Removing the Front Cover
1) Open the feeder cover [1], and then remove the screw [2].
[2]
2) Remove the two screws [3], and then detach the front cover [4].
F-3-132
F-3-133
[1]
[4]
[3]
[2]
F-3-134
[1]
F-3-135

3.4.10.2 Removing the Feeder Cover

1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
[3]
[1]

3.4.10.3 Removing the Rear Cover

1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
0010-6610
Remove the rear cover with the two claws [3] released.

3.4.10.4 Removing the ADF Driver PCB

1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
[3]
F-3-136
[2]
F-3-137
[1]
[3]
F-3-138
Chapter 3
[4]
0010-6614
0010-6625
[2]
0011-3237
3-21