Chapter 3
3.4.8.9 Removing the Feeding Unit
1) Remove the two screws [1].
2) Remove the two screws [1], and then remove the feeding unit.
3.4.8.10 Removing the Read Roller 2
1) Remove the two screws [1], and then detach the cover [2].
[2]
2) Remove the resin ring [1], gear [2], and bearing [3].
3-18
[3]
[1]
[2]
F-3-112
[1]
F-3-113
[1]
[2]
F-3-114
[1]
F-3-115
3) Remove the resin ring [1], belt [2], gear [3], and bearing [4], and then
remove the read roller 2 [5].
When installing the read roller 2, loosen the screws [6] and attach the
0010-6666
belt.
[1]
3.4.9 Platen Roller
3.4.9.1 Removing the Front Cover
1) Open the feeder cover [1], and then remove the screw [2].
[2]
0010-4040
2) Remove the two screws [3], and then detach the front cover [4].
[3]
[2]
F-3-116
[2]
[5]
[3] [4] [6]
F-3-117
[1]
F-3-118
[1]
0010-6609