Platen Roller Roll Downstream; Removing The Platen Roller Roll Downstream; Delivery Reversing Roller (Lower); Before Removing The Reversing Roller (Lower) - Canon DADF-M1 Service Manual

Chapter 3
[1]
9) Remove the 2 E-rings [1].
[1]
10) Slide the bushing [1] fitted with a plate toward the rear, and detach the
platen guide [2].
[1]
11) Slide the bushing [1] fitted with a plate upward, and pull out the shaft [2];
then, detach the platen upstream roll [3].
3-14
[1]
F-3-80
F-3-81
[2]
F-3-82
[2]
[3]

3.4.12 Platen Roller Roll Downstream

3.4.12.1 Removing the Platen Roller Roll Downstream

1) Remove the platen downstream roll unit [2].
- 1 screw [1]
[1]
2) Pull out the shaft [2]; then, detach the platen downstream roll [3].
- 1 E-ring [1]
[2]
[3]

3.4.13 Delivery Reversing Roller (lower)

3.4.13.1 Before Removing the Reversing Roller (lower)

1) Remove the inside cover. (page 3-2)Reference[Removing the Inside
Cover]

3.4.13.2 Removeing Delivery Reversing Roller (lower)

1) Remove the segment A, and detach the open/close guide [1] in the direc-
tion of the arrow.
[1]
F-3-83
[2]
F-3-84
[1]
F-3-85
0017-6599
0017-6603
0017-6605