Removing The Pickup Motor; Removing The Feed Motor; Removing The Timing Belt - Canon DADF-P1 Service Manual

Chapter 3
[2]

3.4.10.5 Removing the Pickup Motor

1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the pickup motor [4]
together with the adjusting plate.
[1]
[4]
[3]
[2]

3.4.10.6 Removing the Feed Motor

1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the feed motor [4] together
with the adjusting plate.
[4]
[2]

3.4.10.7 Removing the Timing Belt

1) Remove the screw [1], and then disconnect the ground cable [2].
3-22
[1]
F-3-139
[3]
F-3-140
[1]
[3]
F-3-141
2) Disconnect the two sensor connectors [1].
0010-6639
3) Remove the harness from the harness guide [2].
4) Remove the screw [3], and remove the harness guide [2].
5) Remove the two screws [4], and then remove the metal plate [5].
6) Remove the four screws [6], and then remove the left hinge [7].
0010-6647
7) Remove the four screws [1], and then remove the metal plate.
0010-6654
8) Remove the timing belt [1].
[1] [2]
F-3-142
[1]
[5]
[4]
[7]
[6]
F-3-143
[1]
[1]
F-3-144
[3]
[2]
[6]
[1]