[5]
5) Remove the resin ring [1], and then remove the bearing [2] and lower reg-
istration roller [3].
[1]
3.4.6 Delivery Reversing Roller (upper)
3.4.6.1 Removing the Front Cover
1) Open the feeder cover [1], and then remove the screw [2].
[2]
2) Remove the two screws [3], and then detach the front cover [4].
[3]
[4]
[6]
[3]
[2]
[1]
F-3-66
[2]
[3]
F-3-67
[1]
F-3-68
[4]
F-3-69
3.4.6.2 Removing the Feeder Cover
1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
[3]
[1]
3.4.6.3 Removing the Rear Cover
1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
0010-6606
Remove the rear cover with the two claws [3] released.
3.4.6.4 Removing the ADF Driver PCB
1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
3.4.6.5 Removing the Pickup Motor
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the pickup motor [4]
together with the adjusting plate.
[2]
F-3-70
[1]
[3]
F-3-71
[1]
[2]
F-3-72
Chapter 3
0010-6618
0010-6621
[2]
0011-3232
0010-6635
3-11