Removing The Feeder Cover; Removing The Rear Cover; Removing The Adf Driver Pcb; Removing The Pickup Motor - Canon DADF-P1 Service Manual

[3]

3.4.9.2 Removing the Feeder Cover

1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
[3]
[2]
[1]

3.4.9.3 Removing the Rear Cover

1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
Remove the rear cover with the two claws [3] released.

3.4.9.4 Removing the ADF Driver PCB

1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
[4]
F-3-119
F-3-120
[1]
[2]
[3]
F-3-121
0010-6615

3.4.9.5 Removing the Pickup Motor

1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the pickup motor [4]
together with the adjusting plate.
0010-6624
[3]

3.4.9.6 Removing the Feed Motor

1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the feed motor [4] together
with the adjusting plate.
0011-3236

3.4.9.7 Removing the Timing Belt

1) Remove the screw [1], and then disconnect the ground cable [2].
[1]
[2]
F-3-122
[1] [3]
[4]
[2]
F-3-123
[4] [1]
[2]
[3]
F-3-124
Chapter 3
0010-6638
0010-6646
0010-6653
3-19