Pressurization Solenoid; Removing The Rear Cover; Removing The Pressurization Solenoid (Roller Release Solenoid); Adf Driver Pcb - Canon DADF-P1 Service Manual

3.5.6 Pressurization Solenoid

3.5.6.1 Removing the Rear Cover

1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
Remove the rear cover with the two claws [3] released.
3.5.6.2 Removing the Pressurization Solenoid (Roller
Release Solenoid)
1) Disconnect the connector [1] from the ADF driver PCB.
2) Remove the screw [2], and then remove the pressurization solenoid
(Roller Release Solenoid) [3].
[1]

3.5.7 ADF Driver PCB

3.5.7.1 Removing the Rear Cover
1) Open the feeder cover.
F-3-197
[1]
[2]
[3]
F-3-198
[3]
[2]
F-3-199
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
0010-6203
Remove the rear cover with the two claws [3] released.

3.5.7.2 Removing the ADF Driver PCB

1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
0010-4240
0011-3228
Chapter 3
[1]
[2]
[3]
F-3-200
[1]
[2]
F-3-201
0011-3229
3-31