[1]
[4]
[7]
[6]
7) Remove the four screws [1], and then remove the metal plate.
[1]
8) Remove the timing belt [1].
3.4.7.8 Removing the Document Tray
1) Remove the screw [1] at the front of the machine, and then remove the tray
holder [2].
2) Remove the document tray [3].
[3]
[2]
[5]
[6]
F-3-92
[1]
[1]
F-3-93
[1]
F-3-94
3.4.7.9 Removing the Feeding Unit
1) Remove the two screws [1].
2) Remove the two screws [1], and then remove the feeding unit.
3.4.7.10 Removing the Read Roller 1
1) Turn over the feeder unit.
2) Remove the two resin rings [1], four gears [2], and one bearing [3].
0010-6658
[1]
3) Remove the resin ring [1], belt [2], gear [3], and bearing [4].
[3]
[1]
[2]
F-3-95
[1]
F-3-96
[1]
F-3-97
[2]
[3]
F-3-98
Chapter 3
0010-6667
[2]
0010-4030
3-15