Chapter 3
[2]
[1]
[3]
3) Remove the resin ring [1], belt [2], gear [3], and bearing [4].
4) Remove the platen roller unit [5].
3.4.5.10 Removing the Read Roller 2
1) Remove the two screws [1], and then detach the cover [2].
[2]
2) Remove the resin ring [1], gear [2], and bearing [3].
3) Remove the resin ring [1], belt [2], gear [3], and bearing [4], and then
remove the read roller 2 [5].
3-10
F-3-59
F-3-60
[1]
F-3-61
[3]
[2]
[1]
F-3-62
When installing the read roller 2, loosen the screws [6] and attach the
belt.
[1]
3.4.5.11 Removing the Sensor Unit in the Feeder Unit
1) Remove the two screws [1], and then remove the sensor unit [2].
0011-3738
3.4.5.12 Removing the Lower Registration Roller
1) Remove the E-ring [1], and then remove the gear [2].
2) Remove the resin ring [3], and then remove the gear [4].
3) Remove the E-ring [1] and resin ring [2], and then remove the bearing [3].
4) Remove the screw [4], and then remove the spring [5] and metal plate [6].
[2]
[5]
[3] [4] [6]
F-3-63
[1]
[2]
F-3-64
[4]
[3]
[1]
[2]
F-3-65
0010-6672
0010-4009