User Maintenance; Cleaning; Replacement - Canon DADF-P1 Service Manual

4.1 User Maintenance

4.1.1 Cleaning

Tell the user to clean the following parts every 2000 sheets.
[1] Document glass (large)
[2] Document glass holder
[3] Vertical size plate
[4] Document glass (small)
[5] White plate
[6] Platen roller

4.1.2 Replacement

1. Replacing the Stamp (when the fax feature is provided)
1) Open the feeder cover and separation guide.
2) Using tweezers, remove the stamp.
3) Using tweezers or the like, attach a new stamp.
Be sure to attach the new stamp with the stamp face up.
If the stamp is floating, a jam can occur. Be sure to push in the stamp until it clicks.
Parts to clean Cleaning method
White plate (pressure Clean with a cloth
plate) dampened with water or
neutral detergent and
Document glasses (large/
squeezed hard, and then
small)
wipe with a dry cloth.
Document glass holder
Vertical size plate
Platen roller
[4]
[2]
[6]
T-4-1
Cleaning cycle Remarks
As required
As required or every Parts of reader unit
2000 sheets
As required Parts of reader unit
As required Parts of reader unit
As required or every Parts of reader unit
2000 sheets
[1]
[3]
F-4-1
[5]
F-4-2
F-4-3
Chapter 4
0010-3932
0010-3933
4-1