QMS 1725E Reference page 67

Notes Not all symbol sets are available with certain resident fonts.
The Desktop, PS Math, Math 8, Microsoft-Pub, Pi-Font, PS-
Text, Ventura-Intl, Ventura-Math, Ventura-US, and Windows
symbol sets cannot be used with the resident bitmap fonts
Courier 10, Courier 10 Italic, Courier 10 Bold, Courier 12,
Courier 12 Italic, Courier 12 Bold, and LinePrinter.
The five dingbat symbol sets (PS-ZapfDingbats, Ventura-
Dingbats, Zapf-Dingbats100, Zapf-Dingbats200, and Zapf-
Dingbats300) can be used with all fonts.
If a mismatch between a symbol set and font occurs, the
standard PCL font selection mechanism is used to locate a
font that matches the selected symbol set. With the standard
set of fonts distributed for your printer, this matches the Times*
font, but other user-installed fonts could change this result.
See the HP PCL 5 Technical Reference for more information
on selecting PCL 5 fonts.
Lines/Inch x100
Sets the number of lines printed per inch.
Menu Administration/Emulations/PCL 5/Lines /Inch x100
Choices 0100-4800
Default 0600
Line Termination
Adds an indicator which controls the way the printer interprets CR
(carriage return) and LF (line feed) characters.
Menu Administration/Emulations/PCL 5/Line Termination
Choices CR=CR, LF=LF
CR=CR+LF, LF=LF
CR=CR, LF=CR+LF
CR or LF=CR+LF
Default CR=CR, LF=LF
Printer Configuration
Emulations
4-31