Setting Outputbin X Name; Setting Default Resolution; Setting Gamma Correction - QMS 1725E Reference

Setting Outputbin x Name

These options are used to name output bins 1 and 2.
Menu
Choices
Default

Setting Default Resolution

This option sets the print engine's default resolution.
Menu
Choices
Default
Notes

Setting Gamma Correction

This option sets the print engine's gamma correction.
Menu
Choices
Default
Notes
4-56
Administration/Engine/Outputbin x Name
Up to 16 alphanumeric characters
Outputbin 1 "upper"/ Outputbin 2 "face up"
Administration/Engine/Def Resolution
300 dpi—300x300 dpi resolution.
600 dpi—600x600 dpi resolution.
600 dpi
If your printer is configured for duplex printing and has less
than 16 MB RAM, 600x600 dpi isn't available on all media
sizes. Duplexing using 600x600 resolution requires additional
memory. See the High-Resolution and Duplexing section in
chapter 3, "Advanced Printing Features," of the Operation
guide.
Administration/Engine/Gamma Correction
On, off
Off
Gamma correction "on" produces optimum print quality for
halftones. For information on gamma correction, see chapter
5, "Additional Technical Information," in this guide .
QMS 1725E Print System Reference