Updated Pcl 5 Docs - QMS 1725E Reference

Updated PCL 5 DOCs

Disable Scalable Fonts Command
Syntax
Purpose
Variable
Notes
Install Object Command
Syntax
Purpose
Variables
C-8
%%IncludeFeature:scalablefonts( value )
Enables/disables PCL 5 scalable fonts.
value
Purpose Specifies whether to disable scalable fonts.
Range 0—Enables scalable fonts
1—Disables scalable fonts
Default 0
Disable scalable fonts to
n
Print PCL 4 documents which have selected PCL 5 scalable
fonts.
n
More closely emulate the PCL 4 font environment.
%%IncludeFeature:install( resource id object id )
Establishes the current resource and the default object ID value
for the current job to which it is attached. If it is attached to a job
that downloads a font without setting the current object ID using
the PCL escape sequence <ESC>(#X, it has the appearance of
"storing" the font on disk.
resource id
Purpose Identifies one of the possible locations for
downloaded objects.
Range 0 to 6
Default Internal system disk
Format Integer
Notes If no %%IncludeFeature:install DOC command is
sent, the internal default location is used; otherwise,
this parameter, which must be provided, specifies
one of the alternate locations. For most QMS
printers, resource 6 is the internal system disk.
QMS 1725E Print System Reference