Table of Contents
Advertisement
6
Terminate the last hard disk drive in the chain by plugging a
terminator into the empty SCSI interface port at the rear of
the hard disk drive.
»
Note: If you are installing the Kanji hard disk drive in a chain with
different brands of disk drives, you must check the methods of
termination for those drives. See the documentation for those hard
disk drives for more information on termination. Improper termination
can cause data I/O problems and possibly damage the disk drive or
data on the disk.
7
Connect the power cord to the Kanji hard disk drive and plug
the other end into a grounded AC outlet.
On/Off
switch
8
Turn on the Kanji hard disk drive, and any other external
hard disk drives present.
9
Turn on both power switches on the printer.
»
Note: For the printer to recognize any attached hard disk(s), each hard
disk must be turned on before you turn on the printer. DISK ONLINE
appears on the start-up page if the printer recognizes the disk(s).
6-58
Terminator
QMS 1725E Print System Reference
AC power
Advertisement
Table of Contents
