Setting Hp-Gl Parameters - QMS 1725E Reference

Setting HP-GL Parameters

Fifteen configuration choices are available. The QMS Crown Techni-
cal Reference (shipped on disk with your printer) contains more
detailed information on this emulation.
Plotter
Identifies the HP-GL plotter type.
Menu
Choices
Default
Scaling Percent
Identifies the percentage to reduce or enlarge an image.
Menu
Choices
Default
Notes
Origin
Sets the image offset from the plotter's origin in 0.01" increments.
Menu
Choices
Default
Menu
Choices
Default
4-36
Administration/Emulations/HPGL/Plotter
7550A, 7475A, 7470A, Colorpro
7550A
Administration/Emulations/HPGL/Scaling Percent
001-150 (1-150%)
100 (100%)
To scale plots, select the paper size originally used for the plot
in the Paper Type menu, and then enter the reduction or
enlargement needed to fit the plot on the new page in the
Scaling Percent menu. If necessary, enter new x,y coordinates
in the Origin menu to reposition the plot on the page.
Administration/Emulations/HPGL/Origin/X Direction
0000-8500 (0"-8.5")
0000
Administration/Emulations/HPGL/Origin/Y Direction
00000-11000 (0"-11.0")
00000
QMS 1725E Print System Reference