QMS 1725E Reference page 61

Spooling Timeout
Sets the number of seconds the interface waits for data from the host
before terminating a spooled print job.
Menu Administration/Communications/Parallel/Spool Timeout
Choices 00000-99999
Default 00030
Data Bits
Sets the number of data bits transmitted per character.
Menu Administration/Communications/Parallel/Data Bits
Choices 7 Bits, 8 Bits
Default 8 Bits
End Job Mode
Enables (and identifies an end-of-job sequence) or disables data
stream sensing for the end-of-document (EOD) command.
Menu Administration/Communications/Parallel/End Job Mode
Choices None—The printer recognizes only the PostScript ^D
command.
QMS EOD—The printer recognizes only the QMS
%%EndOfDocument command.
HP EOD—The printer recognizes only the HP
<ESC>%12345X command.
Default None
Notes See chapter 5, "Additional Technical Information," for details on
how to implement this feature on your QMS 1725E Print
System.
Printer Configuration
Communications
4-25