QMS 1725E Reference page 57

Choices Off—Ignore parity errors. The printer prints its best
interpretation of the character(s) affected by the error.
On—Don't ignore parity errors. The printer replaces the
character(s) affected by the error with a question mark.
Default Off
Notes Use the Administration/Communications/Serial/Parity menu to
set parity.
Receive Software Flow Control
Sets the software communication protocol used by the printer to con-
trol communication from the host computer.
Menu Administration/Communications/Serial/Rcv Sw Flow Ctl
Choices ETX/ACK, Robust XON/XOFF, None, XON/XOFF
Default XON/XOFF
Transmit Software Flow Control
Sets the software communication protocol used by the host computer
to control communication with the printer.
Menu Administration/Communications/Serial/Xmit Sw Flow Ctl
Choices ETX/ACK, None, XON/XOFF
Default None
Data Bits
Sets the number of data bits transmitted per character.
Menu Administration/Communications/Serial/Data Bits
Choices 7 Bits, 8 Bits
Default 8 Bits
Stop Bits
Sets the number of stop bits transmitted per character.
Menu Administration/Communications/Serial/Stop Bits
Choices 1 Bit, 2 Bits
Default 1 Bit
Printer Configuration
Communications
4-21