Table of Contents
Advertisement
Using PS Executive Series Utilities
Using the Printer Configuration Menu
»
Note: You may need to press the Next key one or more times to advance
through the list of selections or options.
Use this
to...
key
Access the Administration/Disk
Select
Operations/Format Disk menu.
Access the Format Disk/Dsk#: menu.
Select
Scroll through the list of attached disks.
Next
Select the disk and display a format
Select
confirmation message.
Begin the formatting process. The hard
Select
disk is formatted while the system
reboots.
You are informed when the formatting
process is complete. The printer then
reboots, and a start-up page prints (if
enabled).
»
Note: After an unformatted disk is formatted and the
message displays, you must turn the printer off and back on
COMPLETE
again before the printer can recognize the disk.
Storage Options
The message window
reads...
DISK OPERATIONS
FORMAT DISK
FORMAT DISK
DSK#: x
FORMAT DISK
DSK: x
FORMAT DISK
ARE YOU SURE?
FORMAT DISK
FORMATTING...
FORMAT DISK
FORMAT COMPLETE
FORMAT
Printer Options
6-49
Advertisement
Table of Contents
