Installing an Optional Emulation
O
Caution:
that has been copied to a hard disk.
1
Make sure the printer is on and idle. From the Administration
menu, select the Disk Operations submenu.
2
Press the Next key until
3
Press the Select key.
4
Press the Select key.
5
Press the Select key.
6
The hard disk then copies the contents of the card. When all
of the contents are copied, press the Menu key to exit the
menu. Press the Online/Offline key to allow the printer to
receive data from the host.
Removing a Printer Emulation
6-54
You must have a minimum of 12 MB of RAM to run an emulation
QMS 1725E Print System Reference
INSTALL OPTION
displays.