Control Panel - Gestetner F104 Product Information Manual

1
1. User Function Keys – Each of these can be
programmed for rapid access to frequently used
functions.
F104
Key Function
F1 Print Journal
F2 Fax Header Print
F3 Group Dial
2. [Help] Key – Press the Help key in order to print a
Help List.
3. [User Tools] – Press to access the User Tools
settings and customize various functions to meet
your specific requirements.
4. [Display] – This guides you through tasks and
informs you of the machine status. Messages
appear here.
5. [Cancel] Key – Press to cancel an operation or return
to the previous display.
6. Keys – Press to move the cursor or select
functions.

CONTROL PANEL

3 4 5
2
15
F104L
Key Function
F1 Print Journal
F2 Fax Header Print
F3 Group Dial
F4 E-mail Message
F5 Internet Fax
F9 JPEG
F10 Scan-to-Email
Gestetner F104/F104L
6 8 9 10 11 12
7
16 17 18 19 20 21 22 23
7. [OK] Key – Press to answer "Yes" to a question
on the display.
8. [Job Information] Key – Press to search for
information about a specific job.
9. [Trans. Option] Key – Press to change the
transmission option settings. The indicator lights
when option settings are changed.
10. [Add Toner Indicator] – Blinks when toner is
low and lights continuously when toner has
completely run out.
11. [Load Paper Indicator] – Lights when paper tray is
empty or the paper tray is not fully inserted.
12. [Receive File Indicator] – Lights when a message
has been received into memory.
13. [Energy Saver/Clear Modes] Key
• Energy Saver: Hold down this key for about 2
seconds to manually enter Energy Saver mode.
The machine automatically enters Energy Saver
mode about 5 minutes after the last operation is
carried out.
• Clear Modes: Cancel the current settings and
return to the standby mode (except when
accessing User Tools).
13 14
24 25 26
9