Gestetner F104 Product Information Manual page 13

14. [Copy] Key – Press to copy the original currently
loaded in the ADF.
15. [Quick Dial] Keys – Use to dial numbers with a
single touch or to enter letters and symbols.
Also use for the Group Dial function. You can
select from two types of keyboard layouts:
• QWERTY
• ABC
16. [Quick Dial Key Flip Plate] – There are two Quick
Dial Key Flip Plates:
• To access Quick Dials [01] to [30], flip both
plates right.
• To access Quick Dials [31] to [60], flip one
plate left.
• To access Quick Dials [61] to [90], flip both
plates left.
17. [Stamp] Key – Press this key to switch the Stamp
function on or off.
18. [Original Type] Key –
• Color Scan (only for F104L or F104 with optional
Color NIC FAX Unit): Select when scanning color
originals using the scanner function.
• Halftone: Select Halftone when faxing or copying
photographs or illustrations with fine gradations.
Also can be used for color originals.
19. [Memory Trans.] Key – Press this key to switch
between Memory Transmission and Immediate
Transmission. When the indicator is not lit,
Immediate Transmission is selected, and when the
indicator is lit, Memory Transmission is selected.
10
20. [Resolution] Key – Press to select the level of detail
(Standard, Detail, Super Fine, Extra Super Fine or
300 dpi) to be sent. 300 dpi can be selected only
with the scanner function of the F104L or F104
equipped with the optional Color NIC FAX Unit.
Note: When receiving fax messages or copying with
Extra Super Fine, the optional 40MB Flash Memory
Card is required for 600 dpi resolution.
21. [Speed Dial] Key – Press to specify a destination
programmed in a Speed Dial.
22. [On-Hook Dial] Key – Use to dial the number keys
without having to lift the handset. Note: The
telephone handset is optional.
23. [Pause/Redial] Key
• Pause: Inserts a pause when dialing or storing a
fax number. A pause cannot be inserted as the
first digit.
• Redial: Press to redial one of the last ten numbers.
24. [Number Keys] – Use to dial fax numbers or enter
the number of copies.
25. [Start] Key – Press to start tasks.
26. [Clear/Stop] Key
• Clear: Deletes one character at a time.
• Stop: Interrupts the current operation
(transmission, scanning, copying or printing).
Gestetner F104/F104L