Installing Or Replacing A Port Adapter In Cisco 7200 Series Routers - Cisco 10BASE-FL Installation And Configuration Manual

Move the port adapter lever to the locked position. Figure 19 shows the port adapter lever
Step 7
in the locked position.
If the port adapter lever does not move to the locked position, the port adapter is not
Note
completely seated in the midplane. Carefully pull the port adapter halfway out of the slot, reinsert it,
and move the port adapter lever to the locked position.
Figure 19 Placing the Port Adapter Lever in the Locked Position (Cisco 7206 shown)
Note: This adapter installation
applies to any port or service
adapter.
This completes the procedure for installing a new port adapter in a Cisco 7200 series router.

Installing or Replacing a Port Adapter in Cisco 7200 Series Routers

ETHERNET 10BT
Port adapter
lever (locked
position)
PA-5EFL Ethernet 10BASE-FL Port Adapter Installation and Configuration
TOKEN RING
FAST ETHERNET INPUT/OUTPUT CONTROLLER
Port adapter
handle
29