Table of Contents
Advertisement
17. Materials
Message Displays
Meanings of main messages displayed on the camera screen, and
response methods.
Card
[Memory Card Error]/[Format this card?]
It is a format that cannot be used with the camera.
0
Either insert another card, or back up any necessary data before formatting. (l 48)
[Memory Card Error]/[This memory card cannot be used]
Use a card compatible with the camera. (l 22)
0
[Insert memory card again.]/[Try another card]
Unable to access the card. Reinsert the card.
0
Insert a different card.
0
[Read Error]/[Write Error]/[Please check the card]
Failure to read or write data.
0
Turn off the camera, reinsert the card, and then turn it on again.
The card may be broken.
0
Insert a different card.
0
[Recording was cancelled due to the limitation of the writing speed of
the card]
Insufficient SD card write speed for video, 6K/4K photo, or Post-Focus recording.
0
Use an SD card of a supported Speed Class. (l 23)
If the recording stops even when you are using an SD card that meets the specified
0
Speed Class rating, the data writing speed of the SD card is getting slow.
We recommend backing up data, and formatting (l 48).
Depending on the type of card, recording may stop part way.
0
[Now writing]
Card door or battery door is opened while writing to a card. Wait until writing is
0
finished, then turn the camera off and remove.
456
Advertisement
Table of Contents
