Operating The Camera From A Pc - Panasonic Lumix DC-S1 Owner's Manual

Operating the Camera from a PC

To output via HDMI to an external monitor or TV, connect the camera and
0
external monitor or TV with an HDMI cable. (l 426)
Getting started:
Turn on the camera and PC.
0
Install "LUMIX Tether" on PC.
0
1
Connect the camera and PC with the USB connection
cable (C–C or A–C).
Plug in/out straight holding onto the plug.
0
(Inserting these at an angle may cause deformation or malfunction)
Do not connect the cable to the wrong terminals. This may cause a
0
malfunction.
2
Press 34 to select [PC(Tether)] and then press
.
] is displayed on the screen.
≥[
A message about charging may be displayed. Wait for a while until the
0
message disappears.
3
Use "LUMIX Tether" to operate the camera from the PC.
16. Connecting to Other Devices
or
439