Panasonic Lumix DC-S1 Owner's Manual page 202

9. White Balance/Image Quality
[Grain
Effect] ¢4
[Sharpness]
S
[Noise
Reduction]
[Sensitivity]
[White
Balance] ¢5
¢1 Cannot be adjusted when [Like709], [Standard(HLG)], [Monochrome(HLG)] or
[Like2100(HLG)] is selected.
¢2 Available when anything other than [Monochrome], [L.Monochrome],
[L.Monochrome D] or [Monochrome(HLG)] is selected.
¢3 Available when [Monochrome], [L.Monochrome], [L.Monochrome D] or
[Monochrome(HLG)] is selected.
¢4 Available when [Monochrome], [L.Monochrome] or [L.Monochrome D] is selected.
¢5 Available when [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] is selected. To
use this, set [Sensitivity] and [White Balance] to [ON] in [Add Effects] in [My Photo
Style Settings] in [Photo Style Settings] of the [Custom] ([Image Quality]) menu.
You can set the knee mode with [Like709].
0
For details, refer to page 241.
The effects of [Grain Effect] cannot be checked on the recording screen.
0
[Grain Effect] is not available when using the following functions:
0
– Video recording/[6K/4K PHOTO]/[Post-Focus]
202
[Low]/
[Standard]/
[High]
[Off]
Adjusts the outlines in the image.
Adjusts the noise reduction effect.
Increasing the effect may cause a slight drop in picture
0
resolution.
Sets the ISO sensitivity. (l 192)
¢5
Sets the white balance. (l 194)
While [WB] is selected, press [
0
balance setting screen.
Press [
Sets the grain effect level.
] again to return to the original screen.
s
] to display the white