Table of Contents
Advertisement
8. Metering/Exposure/ISO Sensitivity
Available Shutter Speeds (Sec.)
[MECH.]
[EFC]
[ELEC.]
The effects of the set aperture value and shutter speed will not be visible on
0
the recording screen.
To check the effects on the recording screen, use [Preview]. (l 188)
You can set the preview mode to operate constantly in [M] mode.
[
]
[
The brightness of the recording screen and of actual recorded images may
0
differ.
Check the images on the playback screen.
When using a lens with an aperture ring, set the position of the aperture ring to
0
other than [A] to use the aperture value of the lens.
Shutter speeds faster than 1/320 of a second are not available when you fire
0
the flash. (l 222)
You can customize dial operations:
0
[
]
[
The recording screen can display an exposure meter indicating the
0
relationship between aperture value and shutter speed:
[
]
[
Manual Exposure Assist
When ISO sensitivity is set to other than [AUTO], Manual Exposure Assist
(example:
1
+
You can check the difference between the current exposure value and the
correct exposure (n0) measured by the camera.
Use Manual Exposure Assist as a guide.
0
We recommend checking the images on the playback screen when recording.
186
[B] (Bulb, max. approx. 30 minutes), 60 to 1/8000
[B] (Bulb, max. approx. 30 minutes), 60 to 1/2000
[B] (Bulb, max. approx. 60 seconds), 60 to 1/8000
]
[Constant Preview] (l 339)
]
[Dial Set.]
]
[Expo.Meter] (l 344)
) will be displayed on the recording screen.
[Assign Dial (F/SS)]/[Rotation (F/SS)] (l 336)
Advertisement
Table of Contents
