Table of Contents
Advertisement
Removing the Battery
1
Turn off the camera.
2
Open the battery door.
0
Check that the card access lamp A is off
and then open the battery door.
3
Push the lever B in the direction of the
arrow and then remove the battery.
Ensure that no foreign objects are adhering to the inner side (rubber seal) of
0
the battery door.
Remove the battery after use.
0
(The battery will drain if left inserted in the camera for a long period of time.)
The battery becomes warm after use, during charging, and immediately after
0
charging.
The camera also becomes warm during use. This is not a malfunction.
Check that the camera is turned off and the card access lamp is off before
0
removing the battery.
(The camera may stop operating correctly or the card and recorded images
may be damaged.)
Be careful when removing the battery as the battery will jump out.
0
2. Getting Started
37
Advertisement
Table of Contents
