Entering Characters - Panasonic Lumix DC-S1 Owner's Manual

Entering Characters

Follow the steps below when the character entry screen is displayed.
1
Enter characters.
≥Press 3421 to select characters
and then press
character to enter is displayed.
(Repeat this)
To repeatedly enter the same character,
0
rotate
If you select an item and press
0
operations:
– [ ]: Change the character type to [A] (upper case characters), [a] (lower
case characters), [1] (numbers), and [&] (special characters)
– [ ] ]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
2
Complete entering.
≥Select [Set] and then press
or
or to the right to move the entry position cursor.
until the
or , you can perform the following
or .
14. Menu Guide
369