Message Displays - Panasonic Lumix DC-TZ220D Operating Instructions Manual

Table of Contents

Advertisement

Message displays

The following explains the meaning of major messages displayed on the screen, and how
to respond to them.
Memory cards
[Memory Card Error] / [Format this card?]
• Save needed data on a computer or other device, and then use [Format] on the camera.
• Try with a different card.
[Read Error] / [Write Error] / [Please check the card]
• Check whether card has been inserted correctly (→25).
• Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
• Try with a different card.
[Recording was cancelled due to the limitation of the writing speed of the card]
• The speed class of a required card varies depending on [Rec Format] and [Rec Quality] of a motion
picture. 4K photo recording requires a card that meets a particular speed class rating. Use a card
that meets the rating. Be sure to use a card of the recommended speed class (→26).
• If recording stops even when using a card of the recommended speed class (→26), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (→27). Depending on the type of the card, recording may stop in the middle.
[Memory Card Error] / [This memory card cannot be used]
• Use a compatible card.
Battery
[This battery cannot be used]
• Use a genuine Panasonic battery. Consult the dealer or your nearest Service Centre if display still
remains.
• Wipe any dirt away from the battery terminal.
283
(→26)
Others
(→27)

Advertisement

Table of Contents
loading

Table of Contents