Table of Contents
Advertisement
[Operation]
[WB/ISO/Expo.
Button]
[ISO Displayed
Setting]
[Exposure Comp.
Disp. Setting]
[WHILE PRESSING]/[AFTER PRESSING1]/ [AFTER
PRESSING2]
This sets the operation to be performed when [WB] (White
Balance), [ISO] (ISO sensitivity) or [
Compensation) is pressed.
[WHILE PRESSING]: Allows you to change the setting
while pressing and holding the button.
Release the button to confirm the settings value, and to
return to the recording screen.
[AFTER PRESSING1]: Press the button to change settings.
Press the button again to confirm the settings value, and to
return to the recording screen.
[AFTER PRESSING2]: Press the button to change settings.
Each press of the button switches the settings value.
(Except that of exposure compensation) To confirm your
selection and return to the recording screen, press the
shutter button halfway.
[Front/Rear Dials]
Assigning [
] lets you change [ISO Auto Upper Limit
Setting] on the ISO sensitivity settings screen.
[Cursor Buttons (Up/
Down)]
Assigning [
] lets you set exposure bracketing on the
exposure compensation screen.
[Front/Rear Dials]
Assigning [
] lets you adjust flash output on the exposure
compensation screen.
] (Exposure
[
/
] / [
/
[OFF/
] / [
/
[
]/ [OFF]
[
/
] / [
/
[
/
] / [
/OFF]
14. Menu Guide
] /
] / [
/OFF]
] / [OFF/
] /
335
Advertisement
Table of Contents
