Table of Contents
Advertisement
Lens
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
0
Remove the lens once, and then attach it again without pressing the lens release
button. (l 49)
Turn on the camera again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached
correctly.]
0
Remove the lens from the camera body and gently wipe the contacts on the lens and
the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
Battery
[This battery cannot be used]
Use a genuine Panasonic battery.
0
If this message is displayed even when a genuine Panasonic battery is used, contact
the dealer.
If the terminal of the battery is dirty, remove the dirt and dust from them.
0
Wi-Fi
[Failed to connect wireless access point]/[Connection failed]/[No
destination found]
The wireless access point information set on the camera is wrong.
0
Check the authentication type and encryption key. (l 415)
Radio waves from other devices may block the connection to a wireless access
0
point.
Check the status of other devices that are connected to the wireless access point as
well as the status of other wireless devices.
17. Materials
457
Advertisement
Table of Contents
