Table of Contents
Advertisement
12. Playing Back and Editing of Images
Displaying a Comparison Screen
You can change a setting while checking the effect by displaying images
with the applied setting value side by side.
1
Press [DISP.] in the screen of Step
The image with the current setting A is
0
displayed at the center.
Touching the image with the current setting
0
enlarges it.
Touching [
display.
A comparison screen cannot be displayed
0
while [Noise Reduction] or [Sharpness] is
selected.
2
Rotate
3
Press
RAW images recorded with the camera are always recorded in the [L] size of
0
[3:2].
With this function, images are processed with the aspect ratio and the angle of
view of [Ex. Tele Conv.] from the time of recording.
When images recorded enlarged with [Ex. Tele Conv.] are processed, they
0
cannot be processed with a [Picture Size] setting that is larger than the size at
the time of recording.
The [White Balance] item is fixed to the setting from the time of recording for
0
pictures recorded with multiple exposures.
The [Brightness correction] effect differs from the effect of exposure
0
compensation during recording.
The results of RAW processing with this function and with the "SILKYPIX
0
Developer Studio" software do not completely match.
RAW processing cannot be performed on the following types of RAW images:
0
– Images recorded with the [High Resolution Mode]
– Images recorded with devices other than this camera
You can register functions to Fn buttons:
0
[
]
[
Processing] (l 279)
276
] returns to the original
,
, or
to change the setting.
or
to confirm the setting.
]
[Fn Button Set]
4
.
0
DISP.
[Setting in PLAY mode]
[RAW
Advertisement
Table of Contents
