Table of Contents
Advertisement
6. Focus/Zoom
[AF ON] button
You can also activate AF by pressing [AF ON].
Subjects and recording conditions that make focusing difficult with AF
mode
– Fast-moving subjects
– Extremely bright subjects
– Subjects without contrast
– Subjects recorded through windows
– Subjects near shiny objects
– Subjects in very dark locations
– When recording subjects both distant and near
When recording with [AFC], if you move the zoom from the wide-angle end to
0
the telephoto end, or suddenly reduce the distance to the subject, it may take
time to achieve focus.
If using the zoom after achieving focus, the focus may be erroneous. In that
0
case, re-adjust the focus.
The AF beep volume and sound can be changed:
0
[
]
[
Magnify the AF Area Position ([AF-Point Scope])
This magnifies the focus position when the AF mode is [
[
]. (In other AF modes, the center of the screen is magnified.)
This magnifies the subject, allowing you to check focus and observe an
enlarged subject as with a telephoto lens.
Use the Fn button registered with [AF-Point Scope] to operate. In default settings,
0
this is registered in [Fn1].
For information about the Fn button, refer to page 279.
94
]
[Beep]
[AF Beep Volume]/[AF Beep Tone] (l 354)
], [
], [
], or
Advertisement
Table of Contents
