Table of Contents
Advertisement
[Monitor / Display]
[HLG View Assist]
[Sheer Overlay]
[Monitor]
[HDMI]
At recording or playback of [HLG Photo] and HLG video, this
displays images with converted color gamut and brightness
on the camera monitor/viewfinder, or outputs these over
HDMI.
[AUTO]: Converts images before outputting them via HDMI
while applying the effect of [MODE2]. This conversion
setting works only when the camera is connected to a
device that does not support HDR (HLG format).
[MODE1]: Converts with an emphasis on bright areas such
as sky.
[MODE2]: Converts with an emphasis on the brightness of a
main subject.
During the dynamic range conversion of HDR images,
0
[MODE1] or [MODE2] is displayed on the screen.
When the conversion is not performed, [HLG] is displayed.
This menu item can be registered to the Fn button.
0
(l 279)
[ON]/ [OFF]
[SET]
Displays recorded pictures by overlapping on the recording
screen.
Use [Image Select] to select the pictures to be displayed.
0
Press 21 to select pictures and then press
to confirm.
When the following functions are being used, [Sheer
0
Overlay] is not available:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
This menu item can be registered to the Fn button.
0
(l 279)
[MODE1]/ [MODE2]/[OFF]
[AUTO]/[MODE1]/[MODE2]/[OFF]
[Transparency]/[Image Select]/
[Reset at Power Off]
14. Menu Guide
or
347
Advertisement
Table of Contents
