Table of Contents
Advertisement
13. Camera Customization
[Save/Restore Camera Setting]
Saves the camera's settings information to the card.
Saved settings information can be loaded to the camera, letting you set the
same settings on multiple cameras.
[
]
Settings: [Card Slot 1(XQD)]/[Card Slot 2(SD)]
[Save]
[Load]
[Delete]
Only settings information from the same model can be loaded.
0
Up to 10 instances of settings information can be saved on one card.
0
List of functions for which saving of settings information is possible (l 485)
0
302
[
]
Select [Save/Restore Camera Setting]
Saves the camera's settings information to the card.
If saving new data, then select [New File], and if overwriting an
0
existing file, select that existing file.
When [New File] is selected, a screen to select the file name
0
to save as is displayed.
[OK]
[Change the file
name]
Loads settings information on a card onto the camera.
Deletes settings information on the card.
Saves using the file name on the screen.
Changes the file name and saves the file.
Available characters: alphabetic
0
characters (upper-case), numerals, up
to 8 characters
For information on how to enter
0
characters, refer to page 369.
Advertisement
Table of Contents
