Table of Contents
Advertisement
8. Metering/Exposure/ISO Sensitivity
In [M] mode, you can compensate the exposure by setting the ISO sensitivity
0
to [AUTO].
When [Auto Exposure Comp.] is set to [ON], the flash output will automatically
0
be set to the level appropriate to the exposure compensation.
When the exposure compensation value falls below or exceeds n3 EV, the
0
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
When the exposure compensation value falls below or exceeds the n3 EV
0
range, exposure compensation values on the status LCD are indicated with
[ ]/[ ]. (l 30)
The set exposure compensation value is stored even if you turn off the
0
camera. (When [Exposure Comp. Reset] is set to [OFF])
The standard value for correct exposure can be adjusted:
0
[
]
[
You can set the exposure compensation value to be reset when the camera is
0
turned off:
[
]
[
You can change the operation of the [
0
[
]
[
Exposure Bracket can be set and flash output can be adjusted on the
0
exposure compensation screen:
[
]
[
190
]
[Exposure Offset Adjust.] (l 328)
]
[Exposure Comp. Reset] (l 328)
]
[WB/ISO/Expo. Button] (l 335)
]
[Exposure Comp. Disp. Setting] (l 335)
] button:
Advertisement
Table of Contents
