Table of Contents
Advertisement
17. Materials
Recording
Recording stops before finishing.
Cannot record.
Cannot use some functions.
In high ambient temperatures or if the camera is used for continuous recording, the
0
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [
recording will be stopped, and the following functions will not be available for a time.
Wait until the camera cools down.
– [6K/4K PHOTO]
– [Post-Focus]
– Video recording
– [AF-Point Scope]
– HDMI output
– Power supply via the USB connection cable
Cannot record images.
The shutter will not operate immediately when the shutter button is
pressed.
If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until
0
focus is achieved. (l 329)
The recorded image is whitish.
Images may look whitish when the lens or image sensor gets dirty with fingerprints or
0
similar.
If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry
cloth.
For information about how to clean the image sensor, refer to page 472.
The recorded image is too bright or dark.
Ensure AE Lock is not set where it is not appropriate. (l 191)
0
460
] is displayed,
Advertisement
Table of Contents
