Maintaining Your Dishwasher; Cleaning The Wash Filters; Cleaning The Spray Arms; General Cleaning - Westinghouse 907 series Care & Use Manual

Table of Contents

Advertisement

MAINTAINING YOUR DISHWASHER

Cleaning the wash filters

The filters should be checked and cleaned regularly. Blocked filters will
result in poor wash performance.
• Open the door & remove the lower basket.
• The dishwasher filter system comprises a coarse/fine filter, microfilter
and a flat filter. Unlock the filter system using the handle on the
microfilter.
• Turn the handle about 1/4 a turn anticlockwise and remove.
• Take hold of the coarse/fine filter (1) by the handle with the hole and
remove from the microfilter (2).
• Clean all filters thoroughly under running water.
• Remove the flat filter (3) from the base of the washing compartment
and clean both faces thoroughly.
• Put the flat filter back in the base of the washing compartment.
• Place the coarse/fine filter in the microfilter and press together.
• Put the filter combination in place and lock by turning the handle
clockwise to the stop. It will "click" into its correct position. During this
process ensure that the flat filter does not protrude above the base of
the washing compartment.
The dishwasher must not be used without filters under any circumstances.
Do not let any foreign objects (e.g. Broken Crockery, Glass, etc.) fall in
the pump beneath the filters before they are refitted.

Cleaning the spray arms

The spray arm should be checked and cleaned regularly. Blocked spray jet
holes will give poor wash results.
• Remove the lower basket. Remove the lower spray arm and unblock
holes by picking out dirt particles with tweezers.
• Remove clips from upper basket rails (see pic). Remove upper basket.
• Clean the upper spray arm by picking out dirt particles with tweezers.
Do not try to remove spray arm from basket as it may break or crack.

General Cleaning

For occasional cleaning of door & control panel, use a soft cloth dampened with mild soapy water.
Do not use any abrasive cleaners. Rinse & dry with a clean cloth.
Do not use stainless steel cleaners to clean the control panel as the chemicals in it may damage
the paint and / or remove the printing from the panel.
Light Globe replacement (if applicable)
In the event of the light globe requiring replacement, follow these instructions:
• Switch off your dishwasher and disconnect the dishwasher power
cord from the power supply.
• Unscrew the lens anticlockwise from within the dishwasher.
• Remove the globe and replace with a maximum 15 Watt bayonet
globe no larger than 26 mm in diameter and 56 mm long.
• Ensure seal is correctly fitted to the lens, then replace lens by
screwing it firmly into place.
The plastic lens must be secured before reconnecting power to the unit. Failing to do this may
potentially cause an unsafe operating environment.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

915 series925 series

Table of Contents